RICH MATE PRO

Feel free to Call

Smart Colour’s Rich Wood is a simple, easy-to-use protective coat that can be
used over wooden substrates.

Hardness & Gloss: Rich Wood offers gloss, more durable hardness, protection as compared to the local polishes.
Self Sealing: Rich Wood can be used as a sealer and as a topcoat; a separate sealer coat and topcoat are not required.
Quick Drying Time: Rich Wood offers quite drying time of 30 minutes, which is much faster than the industry standard of 4 hours.
Quick Drying Time: Rich Wood offers quite drying time of 30 minutes, which is much faster than the industry standard of 4 hours.

For best results, use Indocem Smart Colours’ Rich Wood should be applied at a temperature between 20°C and 40°C and humidity below 75%
Do not over-think; kindly stick to the recommended ratios
Still well and strain before use

To remove stains on tiles and metal surfaces, kindly apply NC thinner on the surface and wipe it clean.
For difficult stains, scraping can be done after application of NC Thinner on the stained area.
Kindly take precaution while spraying / brushing by masking
all the adjoining areas so that they do not get sprayed, because it might be difficult to remove if present on wood or coated wooden and wall surfaces. Use sutiable material as masking material.

Shelf Life: 3 years from date of manufacture in original tightly
closed container away from direct sunlight and extensive
heat.
Pot Life: To be used within 24 hours
Flash Point: (IS 101-1-6 (1987)): Above 30°C (86°F) Drying Time: Surface dry time 60 minutes, and tack free time is 4 hours.
Gloss Levels: 90% (Glossy) minimum, and 15-25% (Matt) on coated wooden panel at 60° Gloss Head.

Kindly refer to the MSDS for Smart Colours Rich Wood, which gives the detailed information on safety measures while handling the coating.
Ensure to use protective equipment like rubber/polyurathene gloves, safety goggles/glasses, face masks, etc. while handling the coating
Smart Colours Rich Wood should be sotres at ambient conditions in well ventilated locations and away from sources of ignitions and fires.
Wear eye protection during application. Avoid contact with eye and skin. In case of contact, wash with soap and plenty of water. Kindly get medical attention if irritation develops or
persists.
Do not inhale or ingest. In case of inhalation, move to an area with fresh open air and seek medical attention if symptoms persist (in both cases).
Dispose in land filling, Do not dispose in any drain or land filling.
No added lead, mercury, or Chromium compunds
Flammable